Confirmation #
Thank you, !
Your order is confirmed.
XAG
Couldn't load pickup availability
The XAG P100 OEM Front Hood Clip (Front), XAG part number 02-001-07399, is the front retaining clip that latches the front edge of the nose cover to the fuselage on the original XAG P100 agricultural drone. It holds the edge of the hood that faces into the airflow in forward flight, where the load on the closure is greatest. Its partner at the rear edge is a separate part number. Operators reach it through searches such as P100 front hood clip front, XAG P100 nose latch, P100 hood lifts in flight, or XAG P100 hood clip replacement.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the rear hood clip (02-001-07397), the front hood (05-002-01634), the front hood rack (02-001-08076), or fasteners.
In forward flight, air strikes the front of the aircraft first. On a spray drone moving along a pass, that airflow presses against the leading edge of the nose cover and tries to work its way underneath it. The front clip is what holds that leading edge down. It is the latch on the windward side of the closure.
That position shapes how the front clip fails. The rear clip mostly suffers from handling, because it is released every time the nose is opened. The front clip suffers more from the loads of flight: airflow, vibration and the flexing of the hood as the aircraft accelerates, brakes and turns. Those loads are small each time and repeated constantly. They fatigue a plastic clip slowly, and fatigue has an awkward property: the clip can lose its holding force long before it visibly breaks.
Agricultural flying makes this worse than it might be on other aircraft. A spray drone flies long, repeated passes, braking hard at each headland and accelerating out of each turn. Every brake pushes the hood forward against the front clip, and every acceleration lets it spring back. Over a season that is a very large number of small load cycles on one small part.
Where it sits. At the front edge of the front hood, towards the nose of the aircraft.
What it connects to. The front hood on one side and its catch on the fuselage or hood rack on the other.
What wears it out. Airflow and vibration fatigue. Nose contacts that push the hood back against the clip. UV and chemical exposure making the plastic brittle. Being forced to latch against a misaligned hood.
What this part is not. It is not the rear clip (02-001-07397). Each clip is designed for its own position and the two are not interchangeable by assumption.
The front clip keeps the leading edge of the nose cover pressed firmly to the fuselage against airflow and vibration, so the hood stays closed and sealed at speed.
A sound front clip provides:
The important word is pressure. A clip that merely engages its catch is closed. A clip that engages and pulls the hood firmly against its seat is holding. Only the second keeps the edge from lifting at speed.
The front seam is also where the air meets the aircraft first, carrying spray drift and dust with it. A leading edge held tight sheds that flow over the hood. A leading edge that has lifted even slightly scoops it underneath.
The front clip's typical failure is not a dramatic snap. It is a gradual loss of grip. The clip still clicks shut, still looks intact, and the hood looks closed on the ground. In flight, with airflow pushing under the leading edge and vibration working the closure, the edge lifts, flutters, or opens a gap — and in the worst case the hood comes away.
Because the clip passes the ground check, this failure is easy to miss. The test is to check holding force, not just engagement.
A fatigued clip should be replaced before it fails. Waiting for it to break means waiting for it to break in flight, which is where the load is.
Front clip replacement is the likely answer when an operator or technician observes:
These come from the front clip's position: windward, vibrated, and first in line for any contact to the nose.
These are not front-clip symptoms, and this part will not fix them. A rear edge that will not latch needs the rear clip, 02-001-07397. A hood that sits unevenly needs its rack checked. A cracked hood needs the front hood. None of those is this clip.
Product name: XAG P100 OEM Front Hood Clip (Front)
XAG part number: 02-001-07399
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
System: Airframe, nose closure
Component type: Front hood retaining clip
Position: Front (leading) edge of the front hood
Mirror position part: Front hood clip (rear), XAG part number 02-001-07397
Function: Latches the front edge of the hood against airflow and vibration
Quantity: 1 × clip
Material, dimensions and weight: Not published for this part
Installation method: Direct replacement at the front clip position
Service adjustability: None — a fatigued clip cannot be re-tensioned
Classification: Genuine XAG OEM retaining clip
Condition: Brand new
Before installation
During installation
After installation
A spare front clip is cheap insurance for any crew flying fast passes all day.
This is not the part you need if the problem is at the rear edge of the hood — that is 02-001-07397 — or if the hood sits unevenly because its rack is distorted. Check the hood fit first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your clip; this one is identified for the original P100.
The front clip holds the windward edge of the hood. When it weakens, the first sign is often only a faint buzz from the nose. The next sign is a lifting edge that lets spray and dust into the forward bay. The last sign is a hood that leaves the aircraft in flight, which can damage the propellers and anything it lands on.
Because a fatigued clip still clicks shut, the ground check passes right up until the failure. That is why a holding-force check — press and lift the front edge — belongs in every pre-flight, and why a weakened clip is worth replacing on suspicion rather than on breakage.
The comparison is lopsided. On one side is a small clip, fitted in minutes. On the other is a hood lost in flight, a possible propeller strike, a search across a field, and an aircraft grounded until the nose is rebuilt. Few parts on the aircraft offer as much protection for as little effort.
A sound front clip restores:
The honest point: a clip is replaced for what it might do next, not only for what it has already done.
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM Front Hood Clip (Front)
XAG part number: 02-001-07399
Brand: XAG
Component: Front hood retaining clip
Position: Front (leading) edge of the front hood
Category: Body shells and covers
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Product line: XAG agricultural drones
Primary function: Holding the windward edge of the hood against airflow and vibration
Mirror position part: Front hood clip (rear) 02-001-07397
Characteristic failure mode: Fatigue that removes holding force while the clip still engages
Distinguishing diagnostic rule: Press and lift the front edge; play or spring means the clip has lost its grip
In-flight signs: Buzzing or flutter from the nose that changes with speed; lifting leading edge
Common causes: Airflow and vibration fatigue, headland braking cycles, nose contacts, UV and chemical exposure
Quantity supplied: 1 × clip
Not included: Rear clip 02-001-07397, front hood 05-002-01634, hood rack 02-001-08076
Fitment method: XAG part number 02-001-07399 plus position and latch profile against the removed clip
Service adjustability: None
Verification after fitting: Front edge held firmly by hand, tight seam, no buzz in a forward pass
Condition: Brand new
Part classification: Genuine XAG OEM retaining clip
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 front hood clip front
XAG 02-001-07399
02-001-07399 hood clip
XAG P100 OEM front hood clip
P100 front hood clip replacement
XAG P100 nose latch
XAG P100 hood lifts in flight
XAG P100 nose cover buzzing
P100 hood clip worn
XAG P100 nose cover clip
XAG P100 airframe parts
XAG P100 body parts
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 front hood clip Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 front hood clip (front)? It is the front retaining clip, XAG part number 02-001-07399, that holds the leading edge of the nose cover to the fuselage on the original P100.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
Is it the same as the rear clip? No. The rear clip is XAG part number 02-001-07397 and holds the other edge of the hood.
My clip clicks shut. Can it still be faulty? Yes. A fatigued clip can still engage while losing its holding force. Press and lift the front edge; if it moves, the clip has lost its grip.
Why does my nose buzz at speed? A front hood edge that is not held tightly can flutter in the airflow. Check the front clip.
Can a hood come off in flight? A badly weakened front clip can let the leading edge lift and, in the worst case, the hood can leave the aircraft. That is why weakened clips should be replaced early.
Why does the front clip wear differently from the rear one? The front clip holds the windward edge against airflow, vibration and headland braking, so it fatigues in flight. The rear clip suffers more from handling when the nose is opened.
Does it come with the rear clip? No. This is the front clip only.
Can I fit it myself? Yes. Remove the old clip and fragments, fit the new one in the same orientation, and check the front edge is held firmly.
How do I check the new clip? Press and lift the front edge by hand, check the seam is tight, then do a short forward pass and listen for buzzing.
Should I check it every day? A quick press-and-lift check of the front edge is a good pre-flight habit.
Does a nose strike affect the clip? Yes. A strike can push the hood back and overstress the front clip without breaking it. Check it after any contact.
Will a P100 Pro clip fit? Do not assume so. Match the XAG part number on the clip you removed; this one is identified for the original P100.
How do I confirm the part number? Look for XAG part number 02-001-07399, or send us a photograph of the hood edge and clip and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Reviewed against your live Shopify cart.
Updating your cart…
Taxes and shipping calculated at checkout.
Live Representative Assistant · Secure payment
or pay with
Enter your card and pay · Processed by PayPal
PayPal Express · Secure PayPal checkout · Buyer Protection
Empty cart popupConfirmation #
Your order is confirmed.
Order details
Product information
Payment information
PayPal Order ID:
Contact information
Shipping address