Confirmation #
Thank you, !
Your order is confirmed.
XAG
Couldn't load pickup availability
The XAG P100 OEM Landing Skid Bottom Rod Bracket, XAG part number 02-001-07979, is the bracket that holds the landing skid's bottom rod on the original XAG P100 agricultural drone. The bottom rod is the part of the landing gear that meets the ground; this bracket is what joins it to the rest of the skid and holds it at the right height, spacing and angle. Operators reach it through searches such as P100 skid bottom rod bracket, XAG P100 landing gear bracket, P100 skid foot bracket cracked, or XAG P100 landing skid bracket.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the bottom rod, the bottom rod bracket clamp (02-001-08049), the bottom rod rubber buffer (02-001-08286), the landing skid clamp (02-001-08764), or fasteners.
The landing gear of the P100 is built up from several pieces. Upright members come down from the application system, and at the bottom a rod runs along the ground to give the aircraft a long, stable footprint. The bottom rod bracket is the joint between the two: it receives the bottom rod, holds it at the correct height and spacing, and transfers every landing load from the rod into the rest of the skid.
That position puts it at the point of contact. On every landing, the bottom rod meets the ground first, and the force goes straight into the bracket. On rough ground, one end of the rod can touch down before the other, twisting the bracket. On a slope, the rod is pushed sideways. When the aircraft is dragged or slid across a surface, the bracket takes the drag.
The bracket works as part of a small assembly. A clamp secures the rod in the bracket, and a rubber buffer cushions the joint. Each of those is a separate part with its own part number, and each wears differently. The bracket is the rigid piece that holds the geometry; the clamp holds the rod in place; the buffer softens the contact.
That makes the diagnosis a matter of finding which piece of the assembly has failed. A rod that slides in the bracket may only need the clamp. A rod that clatters may only need the buffer. A bracket that is cracked, bent or has a damaged bore needs the bracket itself.
A cracked bracket is worth taking seriously. It holds the bottom rod, and the bottom rod is what the aircraft stands on. A bracket that lets go during a landing drops one corner of the aircraft, which can tip it onto its arms.
Where it sits. At the bottom of the landing skid, where the bottom rod joins the upright members.
What it connects to. The landing skid above and the bottom rod below, with the bracket clamp and rubber buffer as part of the joint.
What wears it out. Hard landings. Uneven ground loading one end of the rod. Landing while drifting sideways. Dragging the aircraft. Overtightened screws.
What this part is not. It is not the bottom rod, the bracket clamp, the rubber buffer or the landing skid clamp.
The bottom rod bracket holds the landing skid's bottom rod at its correct height, spacing and angle, and carries landing loads into the skid.
A sound bracket provides:
Its value is in geometry. The aircraft stands where the bottom rods put it, and the brackets decide where that is.
The bottom rod joint is three parts working together. Each fails in its own way, and only one of them is this bracket.
If the bracket is cracked, bent or its bore is damaged, this bracket is the part. If the bracket is sound but the rod slides, it is the clamp. If the rod knocks, it is the buffer.
Bottom rod bracket replacement is the likely answer when an operator or technician observes:
These come from hard landings, uneven ground, sideways landings and dragging.
These are not bracket symptoms, and this part will not fix them. A rod that slides in a sound bracket needs the bracket clamp. A rod that knocks needs the rubber buffer. A bent rod is the rod. A skid that moves at the application system is the landing skid clamp. A new bracket restores the joint's geometry; it does not replace the other parts of the joint.
Product name: XAG P100 OEM Landing Skid Bottom Rod Bracket
XAG part number: 02-001-07979
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
System: Landing gear
Component type: Landing skid bottom rod bracket
Installed position: Where the bottom rod joins the landing skid
Function: Holds the bottom rod at its correct height, spacing and angle
Works with: Bracket clamp 02-001-08049 and rubber buffer 02-001-08286 (sold separately)
Quantity: 1 × bracket
Quantity per aircraft: Not published for this part
Material, dimensions and weight: Not published for this part
Installation method: Direct replacement at the existing bracket position
Service adjustability: None
Classification: Genuine XAG OEM landing gear bracket
Condition: Brand new
Before installation
During installation
After installation
The bottom rod bracket is a landing gear repair part for aircraft working rough ground.
This is not the part you need if the bracket is intact and the rod only slides or knocks, or the rod itself is bent. Check which piece of the joint has failed first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your bracket; this one is identified for the original P100.
An agricultural drone lands many times a day, fully or partly loaded, on ground chosen for convenience rather than flatness. The bottom rods take the first contact on every landing, and the brackets carry that contact into the rest of the landing gear.
A cracked bracket is a weak link at exactly the point where the aircraft is most exposed. If it lets go on landing, one corner drops, the aircraft leans, and on uneven ground it can tip onto its arms and propellers. That turns a small part into a large repair.
Diagnosing the joint properly avoids both kinds of mistake: replacing a sound bracket when only the clamp or buffer had worn, or tightening a clamp around a bracket that has already cracked.
A quick look at each joint after any hard landing — bracket, clamp and buffer — catches problems while they are still small.
A sound bottom rod bracket restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM Landing Skid Bottom Rod Bracket
XAG part number: 02-001-07979
Brand: XAG
Component: Landing skid bottom rod bracket
Category: Landing gear
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Product line: XAG agricultural drones
Installed position: Where the bottom rod joins the landing skid
Primary function: Holding the bottom rod at its correct height, spacing and angle
Works with: Bracket clamp 02-001-08049, rubber buffer 02-001-08286
Characteristic failure modes: Cracks, distorted bore, broken mounting points
Distinguishing diagnostic rule: Cracked or bent bracket needs the bracket; sliding rod needs the clamp; knocking rod needs the buffer
Common causes: Hard landings, uneven ground, sideways landings, dragging
Quantity supplied: 1 × bracket
Not included: Bottom rod, bracket clamp 02-001-08049, rubber buffer 02-001-08286, landing skid clamp 02-001-08764, fasteners
Fitment method: XAG part number 02-001-07979 plus bore and mounting points against the removed bracket
Service adjustability: None
Verification after fitting: Aircraft stands level; rod does not slide or knock
Condition: Brand new
Part classification: Genuine XAG OEM landing gear bracket
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 landing skid bottom rod bracket
XAG 02-001-07979
02-001-07979 bottom rod bracket
XAG P100 OEM bottom rod bracket
P100 bottom rod bracket replacement
XAG P100 landing gear bracket
XAG P100 skid foot bracket
XAG P100 landing skid bracket
P100 skid bracket cracked
XAG P100 landing skid bottom rod
XAG P100 landing gear parts
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 bottom rod bracket Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 landing skid bottom rod bracket? It is the bracket, XAG part number 02-001-07979, that holds the landing skid's bottom rod on the original P100.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
Does it include the bottom rod? No. The rod is a separate part.
Does it include the clamp and buffer? No. The bracket clamp is XAG part number 02-001-08049 and the rubber buffer is 02-001-08286, both sold separately.
My bottom rod slides in its bracket. Do I need this bracket? Not if the bracket is intact. A sliding rod usually needs the bracket clamp.
My bottom rod knocks on landing. Is it the bracket? Usually not. Knocking with a sound bracket and clamp points at a worn rubber buffer.
When do I need the bracket itself? When it is cracked, bent, its bore is distorted, or its mounting points are broken.
What usually damages it? Hard landings, uneven ground loading one end of the rod, sideways landings and dragging the aircraft.
Why does a cracked bracket matter? If it fails on landing, one corner drops and the aircraft can tip onto its arms and propellers.
Can I fit it myself? Yes. Support the aircraft, mark the rod position, remove clamp and buffer, fit the new bracket and reassemble.
How do I check the repair? Stand the aircraft on flat ground and confirm it sits level, and confirm the rod neither slides nor knocks.
Should I replace the clamp and buffer at the same time? If they show wear, yes. While the joint is apart is the easiest time.
Does it come with fasteners? No. Reuse sound original fasteners.
How many bottom rod brackets does the P100 use? The quantity per aircraft is not published for this part. Count the brackets on your aircraft, or send us a photograph and we will confirm.
How can I make the brackets last? Land on the flattest ground available, avoid landing while drifting, and lift rather than drag the aircraft.
Is it the same as the landing skid clamp? No. The landing skid clamp fixes the skid to the application system. This bracket is at the bottom rod.
Will a P100 Pro bracket fit? Do not assume so. Match the XAG part number on the bracket you removed; this one is identified for the original P100.
How do I confirm the part number? Look for XAG part number 02-001-07979, or send us a photograph of the joint and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Reviewed against your live Shopify cart.
Updating your cart…
Taxes and shipping calculated at checkout.
Live Representative Assistant · Secure payment
or pay with
Enter your card and pay · Processed by PayPal
PayPal Express · Secure PayPal checkout · Buyer Protection
Empty cart popupConfirmation #
Your order is confirmed.
Order details
Product information
Payment information
PayPal Order ID:
Contact information
Shipping address