Confirmation #
Thank you, !
Your order is confirmed.
XAG
Couldn't load pickup availability
The XAG P100 OEM Liquid Container Level Detector, XAG part number 05-002-01379, is the level sensor inside the spray tank of the original XAG P100 agricultural drone. It tells the flight system how much spray liquid remains, so the aircraft knows when the tank is running out, when to stop spraying, and when to return for a refill. Operators find it through searches such as P100 level detector, XAG P100 tank level sensor, P100 says tank empty but still full, or XAG P100 liquid level error.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the liquid container itself (02-001-09229), the container lid (14-005-00003), the inlet filter (02-001-05108), seals other than any fitted to the detector as supplied, or fasteners.
A spray drone has to know two things about its tank at all times: whether there is liquid to spray, and how much is left. Without that knowledge it cannot plan a sortie, cannot mark where it stopped, and cannot protect its pumps from running dry. The level detector is how it knows.
The detector sits in the liquid container and reports the liquid level to the flight system continuously. The aircraft uses that report to estimate remaining spray, to decide when the tank is effectively empty, to stop the pumps before they draw air, to record a breakpoint in the field, and to return for refill so the route can be resumed from exactly where it ended.
Where it sits. In the P100's liquid container, in contact with or in view of the spray liquid, connected to the aircraft's electronics.
What it connects to. The flight system, which uses the level reading to manage spraying and refill decisions.
What wears it out. Constant contact with agricultural chemicals, some of them aggressive to plastics, seals and electronics. Residue and crystallised product building up on the sensing surface. Moisture getting into the connector. Impacts when the tank is removed, filled or cleaned roughly.
What this part is not. It is not the tank, the lid, the inlet filter, the pump or the flow measurement. And it is not the reason a tank leaks. Each of those is a separate part with its own number.
The level detector converts the contents of the tank into information the aircraft can act on. Every automated decision that depends on remaining liquid depends on it.
A working detector supports:
The detector does not measure flow rate, does not control the pumps directly, and does not affect the application rate. It answers one question — how much is in the tank — and the rest of the system relies on that answer being true.
A level detector fails in two directions, and both are easy to blame on something else.
False empty. The aircraft reports the tank empty, stops spraying and heads home with liquid still in the container. Operators often read this as a pump or flow problem — the aircraft stopped spraying, so the spraying side must be at fault. Open the lid and the answer is visible: there is liquid in the tank that the aircraft thinks is not there.
False full. The aircraft believes liquid remains when the tank is dry. The pumps keep running, draw air, and the spray from the nozzles thins or stops while the aircraft carries on along its route. This is the more damaging failure: untreated strips the aircraft records as treated, and pumps run without liquid to lubricate and cool them. It is usually misread as a blocked line or a failing pump, because those also stop the spray.
The test is simple and needs no tools: compare what the aircraft says with what is in the tank.
If cleaning fixes the reading, the detector was dirty, not failed. If readings stay wrong with a clean detector and plain water, replace it.
Level detector replacement is the likely answer when, after cleaning, an operator or technician observes:
Those failures come from what the detector lives in: agricultural chemistry, residue, moisture and handling during filling and cleaning.
These are not level-detector symptoms, and this part will not fix them. Spray that stops while the tank is full and the reading is correct is a pump, filter, line or nozzle problem. A tank that leaks is the tank, the lid or a fitting. Uneven application across the swath is nozzles or height. None of those needs a new detector.
Product name: XAG P100 OEM Liquid Container Level Detector
XAG part number: 05-002-01379
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
System: Spraying system, liquid container
Component type: Liquid level detector (sensor)
Installed position: Inside the liquid container
Function: Reports remaining spray liquid to the flight system
Quantity: 1 × detector
Sensing method and measuring range: Not published for this part
Dimensions and weight: Not published for this part
Connector: Not published for this part; match against the detector you removed
Chemical compatibility: Not published for this part; rinse after every job
Installation method: Direct replacement for the original detector
Service adjustability: None — the detector reads correctly or it does not
Classification: Genuine XAG OEM sensor
Condition: Brand new
Before installation
During installation
After installation
The level detector matters to any operation that relies on automated refill cycles and accurate breakpoints — which is every working spray operation.
This is not the part you need if cleaning the detector fixes the reading, if spray stops with a full tank and a correct reading, or if the tank itself is leaking. Check those first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your detector; this one is identified for the original P100.
The level detector decides when each tank ends. Get that wrong in one direction and the aircraft carries liquid home, adding refill cycles and wasting flight time. Get it wrong in the other and the aircraft flies on with an empty tank, leaving untreated ground that the records show as treated and running pumps dry.
The second failure is the expensive one, because it is hidden. An untreated strip does not announce itself until the crop shows it, sometimes weeks later, and by then the cause is hard to trace. A pump that runs dry wears faster and can fail early. Both trace back to one small sensor reporting the wrong level.
A working detector protects:
And the habit that protects the detector costs nothing: rinse the tank and detector with clean water at the end of every job.
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM Liquid Container Level Detector
XAG part number: 05-002-01379
Brand: XAG
Component: Liquid level detector (sensor)
Category: Spray system parts
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Product line: XAG agricultural drones
Installed position: Inside the liquid container
Primary function: Reporting remaining spray liquid to the flight system
Supports: Empty detection, dry-run protection, breakpoint recording, return to refill
Characteristic failure modes: False empty (liquid left in tank) and false full (tank dry, pumps running)
Distinguishing diagnostic rule: Compare the reported level with the tank contents; clean the detector and retest with plain water before replacing
Common causes: Chemical residue and crystallisation, chemical attack, moisture in the connector, handling damage
Quantity supplied: 1 × detector
Not included: Liquid container 02-001-09229, lid 14-005-00003, inlet filter 02-001-05108, fasteners
Published ratings: Not published for this part
Fitment method: XAG part number 05-002-01379 plus connector and mounting layout against the removed detector
Verification after fitting: Sensible level with clean water, no leaks, correct empty detection
Maintenance: Rinse tank and detector with clean water after every job
Condition: Brand new
Part classification: Genuine XAG OEM sensor
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 liquid container level detector
XAG 05-002-01379
05-002-01379 level detector
XAG P100 OEM level detector
P100 tank level sensor replacement
XAG P100 tank level sensor
XAG P100 says tank empty but still full
XAG P100 liquid level error
P100 sprays dry pump runs empty
XAG P100 spray tank sensor
XAG P100 spraying system parts
XAG P100 spray tank parts
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 level detector Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 liquid container level detector? It is the level sensor in the P100 spray tank, XAG part number 05-002-01379. It reports remaining liquid so the aircraft knows when to stop spraying and return to refill.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
My P100 says the tank is empty but there is liquid left. Is it the detector? Very likely, once you have cleaned the detector and retested with plain water. A pump fault would stop spray without changing the reported level.
The spray stopped but the app still shows liquid. What happened? The tank probably ran dry before the detector registered it. That is a false-full reading, and the pumps may have run on air. Clean and test the detector.
Why is a false-full reading so serious? Because the aircraft keeps flying its route with nothing coming out of the nozzles, leaving untreated strips the records show as treated, and running the pumps dry.
Can residue cause wrong readings? Yes. Film, residue and crystallised product on the sensing surface are the most common cause. Clean it with water and a soft brush before replacing anything.
Can a particular product confuse the detector? If readings are correct with plain water and wrong with one product, foam or residue from that product may be the cause rather than a failed detector.
Does it come with the tank? No. The liquid container (02-001-09229), lid (14-005-00003) and inlet filter (02-001-05108) are separate parts.
Can I fit it myself? Yes. Empty, rinse and dry the tank, wear chemical-resistant gloves, photograph the original in place, and fit the new detector in the same position.
How do I check the new detector? Fill with clean water, check the reported level and look for leaks, then spray it down and confirm empty is detected only when the tank is empty.
Does the detector control the application rate? No. It only reports how much liquid remains. Rate and flow are handled elsewhere in the spraying system.
How do I make it last? Rinse the tank and detector with clean water after every job and keep the connector dry.
Will a P100 Pro detector fit? Do not assume so. Match the XAG part number on the detector you removed; this one is identified for the original P100.
How do I confirm the part number? Look for XAG part number 05-002-01379 on the detector you removed, or send us a photograph and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Reviewed against your live Shopify cart.
Updating your cart…
Taxes and shipping calculated at checkout.
Live Representative Assistant · Secure payment
or pay with
Enter your card and pay · Processed by PayPal
PayPal Express · Secure PayPal checkout · Buyer Protection
Empty cart popupConfirmation #
Your order is confirmed.
Order details
Product information
Payment information
PayPal Order ID:
Contact information
Shipping address