Confirmation #
Thank you, !
Your order is confirmed.
XAG
Couldn't load pickup availability
The XAG P150 OEM Long Application System Tube, XAG part number 02-002-14300, is the long tube in the application system liquid path of the XAG P150 (2024) agricultural drone. Tubes are easy to overlook because they rarely fail dramatically. Instead, they kink, collapse, harden and narrow, and the result is lower flow on whatever the tube feeds. If one branch of the spraying system delivers less than the others, while its nozzles test clean, a restricted tube on that branch is a likely cause. Operators reach it through searches such as P150 long spray tube, XAG P150 application tube, P150 spray hose, or XAG P150 low flow one side.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the short application system tube (02-002-14301), the application system tube connector component (14-007-00116), the water pipe adapter (14-007-00019), the pump, nozzles, or tools.
The application system moves liquid from the tank to the nozzles through a network of tubes. On the P150, XAG supplies a long and a short application system tube as separate parts, each with its own length and route. This is the long tube. Long and short tubes are not interchangeable: a tube that is too short will be strained at its ends, and a tube that is too long will loop or kink.
The specific route of the long tube is not published for this part. Match it by XAG part number and by comparing length and ends with the tube you remove.
A tube's job seems simple: carry liquid without leaking. But to deliver the application rate the operator sets, it also has to carry that liquid without restriction. Anything that narrows the inside of the tube reduces flow on whatever it feeds.
Tubes narrow in several ways. A tube routed with a sharp bend can kink, closing partly or completely. A tube that has been pinched by a cover or clip can stay flattened. Over a season, sun, heat and chemicals can harden tube material, so that bends that once curved smoothly start to fold. And on the suction side of a pump, a softened or aged tube can collapse inward under suction, restricting flow exactly when the pump is working hardest.
The symptom is a branch that delivers less than it should. If nozzles on one branch spray weakly while others are normal, and those nozzles test clean, a restricted tube is a likely cause. Running the system with water and watching each tube along its route, especially at bends, often shows the kink or flattened section.
Tubes also leak, of course. Split ends, cracks from hardening, and abrasion where tubes rub against edges all let liquid out. Leaks are easier to find than restrictions, but both mean the tube needs replacing.
Routing is everything. A new tube should follow exactly the original path, through its clips and guides, with smooth curves and no sharp bends, and clear of edges that could rub it.
Rinsing the system with clean water after every job reduces chemical attack on tube material and keeps the inside clear of deposits that also narrow it.
Where it sits. In the application system liquid path, as the long tube; specific route not published for this part.
What it connects to. The connectors and fittings at each of its ends.
What wears it out. Kinking. Pinching. Sun, heat and chemical hardening. Abrasion. Collapse under suction.
What this part is not. It is not the short tube, a connector or the water pipe adapter.
The long application system tube carries liquid along its section of the application system without leaking or restricting flow.
A sound long tube provides:
Its value is in delivering full flow, not just holding liquid in.
A branch that delivers less than the others often has a restricted tube. Follow it along its route while the system runs with water.
If the tube is kinked, flattened, hardened, collapsing, split or abraded, this tube is the part.
Long tube replacement is the likely answer when an operator or technician observes:
These come from routing, pinching, ageing, chemicals and abrasion.
These are not long tube symptoms, and this part will not fix them. A blocked nozzle or filter needs cleaning. A leaking connector needs the connector. A worn pump needs the pump. A restriction in the short tube needs the short tube. A new long tube restores its section of the liquid path only.
Product name: XAG P150 OEM Long Application System Tube
XAG part number: 02-002-14300
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Application system, liquid path
Component type: Application system tube (long)
Installed position: In the liquid path; route not published for this part
Function: Carries liquid along its section of the application system
Not interchangeable with: Short application system tube 02-002-14301
Quantity: 1 × tube
Length, diameter and material: Not published for this part
Installation method: Fitted between its connectors along the original route
Classification: Genuine XAG OEM application system part
Condition: Brand new
Before installation
During installation
After installation
The long application system tube is a wear part of the liquid path.
Service centres trace tubes early when one branch underperforms, because a restricted tube is easy to miss and often blamed on nozzles or the pump.
This is not the part you need if the tube is sound and the restriction is in a nozzle, filter, connector or the short tube. Run a water test and trace the branch first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your tube; this one is identified for the P150.
A tube that does not leak can still be failing. Restrictions reduce flow quietly, and the result is a branch that under-applies while everything looks dry.
Uneven application means uneven results in the field. Tracing tubes when one branch underperforms often finds a kink, a flattened section or a hardened bend in minutes.
Replacing a restricted or leaking tube restores full flow and an even spray pattern across the aircraft.
Correct routing protects the new tube. Smooth curves, no sharp bends and nothing pressing on it keep it open for its whole life.
Rinsing after every job slows chemical hardening and keeps deposits from narrowing the inside.
For crews applying corrosive products, inspecting tubes more often catches hardening before it becomes a kink or crack.
A sound long application system tube restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM Long Application System Tube
XAG part number: 02-002-14300
Brand: XAG
Component: Long application system tube
Category: Application system liquid path
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Installed position: In the application system liquid path
Primary function: Carrying liquid along its section without leaking or restricting flow
Characteristic failure modes: Kinks, flattening, hardening, collapse, splits, abrasion
Distinguishing diagnostic rule: Weak spraying on one branch with clean nozzles points at a restricted tube
Common causes: Poor routing, pinching, ageing, chemicals, abrasion
Wear driver: Chemical exposure and routing
Not interchangeable with: Short application system tube 02-002-14301
Related parts: Tube connector component 14-007-00116, water pipe adapter 14-007-00019
Not included: Short tube, connectors, adapter, pump, nozzles, tools
Fitment method: XAG part number 02-002-14300 plus length and ends against the removed tube
Verification after fitting: No leaks; branch sprays like the others; no collapse under suction
Condition: Brand new
Part classification: Genuine XAG OEM application system part
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 long application system tube
XAG 02-002-14300
02-002-14300 application tube
XAG P150 OEM spray tube
P150 long tube replacement
XAG P150 application tube
XAG P150 spray hose
XAG P150 low flow one side
P150 kinked spray tube
XAG P150 weak spraying
XAG P150 application system parts
XAG P150 spray system parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 spray tube Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 long application system tube? It is the long tube, XAG part number 02-002-14300, in the XAG P150 application system liquid path.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
Can I use the short tube instead? No. The short tube is 02-002-14301, with a different length and route.
One side sprays weakly but the nozzles are clean. Could it be a tube? Yes. A kinked, flattened or collapsing tube restricts flow on its branch.
Where does it run? The specific route is not published for this part. Match it against the tube you removed and follow the original path.
Can a tube collapse? On the suction side, an aged or soft tube can draw flat under suction and restrict flow.
Does it include connectors? No. The tube connector component is 14-007-00116, sold separately.
Can I cut a generic hose to length? Not recommended. Diameter, wall and material affect flow, sealing and chemical resistance.
Can I fit it myself? Yes. Drain and rinse, photograph the route, fit the tube with smooth curves and seat both ends fully.
How do I check the repair? No leaks, the branch sprays like the others, and the tube does not draw flat.
What ages tubes? Sun, heat and chemicals, which harden the material over a season.
Will a P150 Max tube fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
How can I make tubes last? Route them correctly and rinse the system with clean water after every job.
Should I wear protection? Yes. Gloves and eye protection, as residue may remain.
The tube leaks at the end. Is it the tube or the connector? Check both. A split tube end or a damaged connector can each cause it.
Can I straighten a kink? A kinked section is often weakened. Replace the tube and correct the routing.
What length is it? The length and diameter are not published for this part. Match against the tube you removed.
How do I confirm the part number? Look for XAG part number 02-002-14300, or send us a photograph of the tube and its route and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Reviewed against your live Shopify cart.
Updating your cart…
Taxes and shipping calculated at checkout.
Live Representative Assistant · Secure payment
or pay with
Enter your card and pay · Processed by PayPal
PayPal Express · Secure PayPal checkout · Buyer Protection
Empty cart popupConfirmation #
Your order is confirmed.
Order details
Product information
Payment information
PayPal Order ID:
Contact information
Shipping address