Confirmation #
Thank you, !
Your order is confirmed.
XAG
Couldn't load pickup availability
The XAG P150 OEM M3×8×0.5 Gasket, XAG part number 02-002-10222, is a small gasket for M3 fasteners on the XAG P150 (2024) agricultural drone. Its XAG name gives its size: an M3 hole, an 8 mm outer size and 0.5 mm thickness. A gasket this small is easy to drop and easy to leave out, but it does real work. Under a small screw it spreads the clamping force and protects the surface beneath. Leave it out, and the screw head bears directly on a small area, digging into plastic, cracking it or slowly sinking until the joint loosens. A screw head sunk into its surface is the giveaway. Operators reach it through searches such as P150 M3 gasket, XAG P150 M3 washer, P150 small washer, or XAG P150 screw gasket.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
The quantity per pack is not published for this part. Check the listing quantity, or ask us and we will confirm before dispatch.
Not included: screws, nuts, the M3 non-metallic insert hex cap nut, or tools.
Small screws are used all over the P150 to fasten covers, brackets and fittings, many of them into or against plastic. A small screw head has a small bearing face, and when the screw is tightened, all of its clamping force is concentrated on that small area. On plastic, that concentration is a problem. The head can dig in, crush the surface, crack the part around the hole, or creep slowly into the plastic over time so that a joint that was tight gradually becomes loose.
A gasket under the screw head solves that. It spreads the force over a wider area, so that the surface beneath carries less pressure. It gives the screw head a smooth, even surface to bear on, and depending on where it is used, it can also help seal the joint or protect a finished surface from damage.
This gasket is sized for M3 screws. Its XAG name describes its dimensions: an M3 hole, an outer size of 8 mm and a thickness of 0.5 mm. Its material and the specific positions where the P150 uses it are not published for this part. Match it against the gasket you remove.
The danger with small gaskets is that they are easy to lose. They stick to fingers, drop into crop, and roll under benches. A joint closed without its gasket looks complete and feels tight at first. Over the following weeks, vibration and the concentrated pressure of the screw head let it sink into the plastic, and the joint loosens. A crack may start at the hole.
The giveaway is the screw head itself. A screw head sunk below the surface, a ring pressed into the plastic around it, or a crack radiating from the hole all point at a joint that should have had a gasket and did not, or had one that was damaged.
Gaskets also wear. Thin gaskets can be flattened, cracked or distorted by over-tightening, and those that seal can harden with heat and chemicals.
When refitting any joint that originally had a gasket, fit a gasket again, and if the old one is distorted, cracked or missing, use a new one. Keeping spares in the field kit makes that easy.
Tightening small screws only until firm, never forcing them, protects both the gasket and the part beneath.
Small gaskets are also easy to fit in the wrong place. On joints that use more than one size of washer or gasket, a photograph taken before dismantling shows which goes where, so that an M3 gasket is not swapped for a thinner or wider one that changes how the joint clamps.
Where it sits. Under M3 screw heads at joints on the P150; specific positions not published for this part.
What it connects to. The screw head above it and the surface beneath it.
What wears it out. Loss during service. Over-tightening. Heat and chemical ageing. Distortion.
What this part is not. It is not a screw, a nut or a motor gasket.
The M3×8×0.5 gasket spreads the clamping force of an M3 screw and protects the surface beneath.
A sound M3 gasket provides:
Its value is in keeping small screws from damaging what they hold.
It also helps a joint hold its tightness over time. With the load spread evenly, the plastic beneath does not creep under the screw head, so the screw stays at the tension it was given.
A screw head that has dug into plastic, or a joint that keeps loosening, often lacks its gasket. Check before tightening further.
If the gasket is missing, flattened, cracked or distorted, this gasket is the part. Repair any cracked part beneath it as well.
M3 gasket replacement is the likely answer when an operator or technician observes:
These come from loss, over-tightening and ageing.
These are not M3 gasket symptoms, and this part will not fix them. A cracked part needs that part. A stripped hole needs repair. A damaged screw needs a new screw. A loose lock nut needs the lock nut. A new gasket protects the joint from now on; it does not repair a part already cracked.
Product name: XAG P150 OEM M3×8×0.5 Gasket
XAG part number: 02-002-10222
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Hardware
Component type: Gasket
Size: M3 hole, 8 mm outer size, 0.5 mm thickness, per the XAG part name
Installed position: Not published for this part
Material: Not published for this part
Quantity per pack: Not published for this part
Installation method: Fitted under the screw head
Classification: Genuine XAG OEM hardware
Condition: Brand new
Before installation
During installation
After installation
The M3 gasket is small hardware that protects joints.
Crews who service their aircraft in the field benefit most from keeping spares, because a gasket dropped in crop or gravel is rarely found again.
Service centres count small washers and gaskets before closing any joint, because a missing one causes slow damage that is easy to miss.
This is not the part you need if the gasket is present and sound and the problem is a cracked part, a stripped hole or a damaged screw. Remove the screw and check first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your gasket; this one is identified for the P150.
A small gasket under a small screw does work out of all proportion to its size. It is what stops the screw head damaging the plastic it holds.
Leaving one out causes slow damage: a head that sinks, a joint that loosens, a crack that starts at the hole. By the time it shows, the part may need replacing.
Fitting a gasket every time, and replacing damaged ones, prevents that damage entirely.
Working over a tray and counting small parts before and after service keeps gaskets from being lost.
Tightening small screws only until firm protects both the gasket and the part beneath.
For crews doing their own maintenance, a supply of spare gaskets means no joint is ever closed without one.
When a part has already been cracked by a missing gasket, replacing the part and fitting a gasket together stops the same damage from happening again.
A sound M3×8×0.5 gasket restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM M3×8×0.5 Gasket
XAG part number: 02-002-10222
Brand: XAG
Component: M3 gasket
Category: Hardware
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Size: M3 hole, 8 mm outer size, 0.5 mm thickness
Primary function: Spreading screw clamping force and protecting the surface beneath
Characteristic failure modes: Loss, flattening, cracking, distortion, hardening
Distinguishing diagnostic rule: A screw head sunk into its surface points at a missing or damaged gasket
Common causes: Service loss, over-tightening, ageing
Wear driver: Service frequency and tightening technique
Quantity per pack: Not published for this part
Not included: Screws, nuts, tools
Fitment method: XAG part number 02-002-10222 plus size against the removed gasket
Verification after fitting: Screw head bears on a flat gasket; joint tight
Service habit: Count small washers and gaskets before and after service
Condition: Brand new
Part classification: Genuine XAG OEM hardware
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 M3x8x0.5 gasket
XAG 02-002-10222
02-002-10222 gasket
XAG P150 OEM M3 gasket
P150 M3 gasket replacement
XAG P150 M3 washer
XAG P150 small washer
XAG P150 screw gasket
P150 screw sinking into plastic
XAG P150 hardware kit
XAG P150 hardware
XAG P150 fasteners
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 M3 gasket Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 M3×8×0.5 gasket? It is a small gasket, XAG part number 02-002-10222, fitted under M3 screws on the XAG P150.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
What do the numbers mean? Per the XAG part name: an M3 hole, an 8 mm outer size and 0.5 mm thickness.
My screw head has sunk into the plastic. Why? The gasket under it is likely missing or damaged, so the head bears on a small area.
Where is it used? The specific positions are not published for this part. Match it against the gasket you removed.
How many come in a pack? The quantity is not published for this part. Check the listing quantity or ask us to confirm.
Can I leave it out? Not recommended. The screw head can crack or sink into plastic and the joint can loosen.
Can I use a generic M3 washer? Not recommended. Size, thickness and material may differ from the design.
Does it include screws? No. Screws are separate.
Can I fit it myself? Yes. Place it on the screw, start by hand and tighten only until firm.
How do I check the repair? The screw head bears on a flat gasket and the joint is tight.
How do I avoid losing gaskets? Work over a tray and count them before and after service.
Will a P150 Max gasket fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
Is it the same as the motor gasket? No. The motor gasket is 02-002-13891, a separate part.
Should I replace a flattened gasket? Yes. A distorted gasket no longer spreads the load evenly.
Should I keep spares? Yes. Small gaskets are easily lost.
How tight should the screw be? Firm, never forced.
How do I confirm the part number? Look for XAG part number 02-002-10222 on the packaging, or send us a photograph and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Reviewed against your live Shopify cart.
Updating your cart…
Taxes and shipping calculated at checkout.
Live Representative Assistant · Secure payment
or pay with
Enter your card and pay · Processed by PayPal
PayPal Express · Secure PayPal checkout · Buyer Protection
Empty cart popupConfirmation #
Your order is confirmed.
Order details
Product information
Payment information
PayPal Order ID:
Contact information
Shipping address