Confirmation #
Thank you, !
Your order is confirmed.
XAG
Couldn't load pickup availability
The XAG P150 OEM Motor Circlip, XAG part number 02-002-13892, is a circlip for the propulsion motor of the XAG P150 (2024) agricultural drone. A circlip is a spring-steel retaining ring that sits in a groove and holds parts in position along an axis. It is a small part with a precise job, and it gives a distinctive symptom when it fails: a motor that still turns smoothly but has movement along its axis, up and down, where there should be none. Operators reach it through searches such as P150 motor circlip, XAG P150 motor retaining ring, P150 motor snap ring, or XAG P150 motor end play.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
The quantity per pack is not published for this part. Check the listing quantity, or ask us and we will confirm before dispatch.
Not included: the motor, the motor bearing (02-002-13256), the motor gasket (02-002-13891), the motor heat dissipation cover (02-001-09662), or circlip pliers.
Inside a motor, some parts must be held so they cannot slide along the axis of rotation. Bearings must stay in their seats, and the rotating part must stay at the correct height relative to the stationary part. Circlips are one of the simplest ways to do that. A circlip is a ring of spring steel with a gap, which is opened or closed with pliers, fitted into a groove, and then springs back to sit firmly in that groove. Once seated, it forms a shoulder that parts cannot move past.
The specific position of this circlip inside the P150 motor is not published for this part. Match it by size and form against the one you remove, and confirm the XAG part number on the packaging.
A circlip works only when two things are true: it has its full spring tension, and it is seated all the way into its groove. If either fails, the parts it retains can move along the axis. That movement is called end play or axial play.
Circlips lose tension when they are opened too far during removal or fitting. A ring that has been over-spread does not return to its original size, so it sits loosely in its groove and can work out under vibration. Circlips can also be distorted by careless pliers work, corroded by residue and moisture, or left not fully seated after a rebuild.
The symptom is distinctive. A motor with a worn bearing feels rough when turned. A motor with a failed circlip may turn perfectly smoothly, but the rotating part can be lifted or pushed along its axis. In flight, that can show up as a change in sound, a light knocking, or vibration, as thrust loads move parts that should be held still.
Because it is a spring part that is easily over-stretched, a circlip is best treated as single-use. Whenever a motor is opened and the circlip removed, fitting a new one is the safest practice.
Fitting needs proper circlip pliers of the right type and size, and care to open the ring only as far as needed to pass it over or into its seat. After fitting, the ring should be rotated slightly in its groove to confirm it is fully seated all the way round.
When a circlip has failed, the groove and the parts it retained should be inspected too. A loose circlip can wear its groove, and parts that have moved may have been damaged.
Where it sits. Inside the propulsion motor, in a retaining groove; specific position not published for this part.
What it connects to. The groove it sits in and the parts it holds in position along the axis.
What wears it out. Over-spreading during removal or fitting. Distortion from pliers. Corrosion. Incomplete seating. Vibration working a loose ring out.
What this part is not. It is not the bearing, the gasket or the motor.
The motor circlip holds motor parts in position along the axis of rotation.
A sound motor circlip provides:
Its value is in holding the motor's parts exactly where they belong.
Roughness points at a bearing. Smooth rotation with movement along the axis points at retention. Check the circlip.
If the circlip is loose, distorted, corroded, not fully seated or has been removed before, this circlip is the part. Inspect the bearing and gasket at the same time.
Circlip replacement is the likely answer when an operator or technician observes:
These come from removal and fitting, pliers damage, corrosion and vibration.
These are not circlip symptoms, and this part will not fix them. A rough or noisy rotation needs the bearing. A damaged groove needs the part it is cut into. A damaged seal needs the gasket. A new circlip restores retention; it does not repair a worn bearing or groove.
Product name: XAG P150 OEM Motor Circlip
XAG part number: 02-002-13892
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Propulsion, motor
Component type: Circlip (retaining ring)
Installed position: Inside the motor, in a retaining groove; not published for this part
Function: Holds motor parts in position along the axis
Size, type and material: Not published for this part
Quantity per pack: Not published for this part
Related parts: Motor bearing 02-002-13256, motor gasket 02-002-13891 (sold separately)
Installation method: Fitted with circlip pliers
Classification: Genuine XAG OEM circlip
Condition: Brand new
Before installation
During installation
After installation
The motor circlip is a retention part needed at every motor rebuild.
Service centres fit a new circlip at every bearing change, because a ring that has been removed once may no longer hold its full tension.
This is not the part you need if the motor is rough rather than loose, or the groove itself is damaged. Turn the motor by hand and check for end play first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your circlip; this one is identified for the P150.
A circlip is a small part holding back large forces. Thrust from a propeller pushes and pulls on the motor's parts with every change of power, and the circlip is part of what keeps them in place.
When it fails, the motor can still turn smoothly, so the problem is easy to miss on a quick check. Testing for end play, not just smoothness, finds it.
End play left unchecked lets parts move and wear. Replacing the circlip early keeps the bearing, the groove and the motor's other parts from damage.
Treating circlips as single-use, and fitting a new one every time a motor is opened, removes doubt about a ring that may have been over-spread.
Good tools and care during fitting matter. The right pliers, opened only as far as needed, protect the ring's spring tension.
For crews rebuilding motors, keeping circlips with bearings and gaskets as a matched rebuild set makes every rebuild complete.
A sound motor circlip restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM Motor Circlip
XAG part number: 02-002-13892
Brand: XAG
Component: Motor circlip
Category: Motor components
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Installed position: Inside the motor, in a retaining groove
Primary function: Holding motor parts in position along the axis
Characteristic failure modes: Lost tension, distortion, corrosion, incomplete seating
Distinguishing diagnostic rule: Smooth rotation with axial movement points at retention, not the bearing
Common causes: Over-spreading, pliers damage, corrosion, vibration
Wear driver: Number of times the motor is opened
Related parts: Motor bearing 02-002-13256, motor gasket 02-002-13891, motor heat dissipation cover 02-001-09662
Quantity per pack: Not published for this part
Not included: Motor, bearing, gasket, heat dissipation cover, circlip pliers
Fitment method: XAG part number 02-002-13892 plus size and form against the removed circlip
Verification after fitting: Fully seated; no end play; smooth rotation; normal sound in hover
Service habit: Fit a new circlip whenever the motor is opened
Condition: Brand new
Part classification: Genuine XAG OEM circlip
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 motor circlip
XAG 02-002-13892
02-002-13892 circlip
XAG P150 OEM motor circlip
P150 motor circlip replacement
XAG P150 motor retaining ring
XAG P150 motor snap ring
XAG P150 motor end play
P150 motor knocking
XAG P150 motor rebuild
XAG P150 motor parts
XAG P150 propulsion parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 motor circlip Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 motor circlip? It is a spring-steel retaining ring, XAG part number 02-002-13892, that holds parts in position inside the XAG P150 propulsion motor.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
My motor turns smoothly but moves up and down. Is it the circlip? Likely. Smooth rotation with axial movement points at retention rather than the bearing.
Can I reuse a circlip? Not recommended. Opening it can reduce its spring tension. Fit a new one whenever it is removed.
How many come in a pack? The quantity is not published for this part. Check the listing quantity or ask us to confirm.
What size is it? The size and type are not published for this part. Match it against the circlip you removed.
Does it include the bearing? No. The motor bearing is 02-002-13256, sold separately.
What tools do I need? Circlip pliers of the right type and size, and eye protection.
How do I know it is seated? It sits fully in its groove all the way round, and can be rotated slightly without lifting out.
Can I fit it myself? Yes, with the right pliers and care. If unsure, use a service centre.
How do I check the repair? No end play, smooth rotation by hand, and normal sound and vibration in a hover test.
What causes circlips to fail? Over-spreading, pliers damage, corrosion and incomplete seating.
The groove looks worn. Will a new circlip fix it? No. A worn groove needs the part it is cut into.
Will a P150 Max circlip fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
Should I replace it during a bearing change? Yes. Fit a new circlip at every bearing change.
Can end play damage the motor? Yes. Parts that move under thrust wear themselves and the bearing.
Is it the same as the motor gasket? No. The motor gasket is 02-002-13891, a separate part.
How do I confirm the part number? Look for XAG part number 02-002-13892 on the packaging, or send us what you found and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Reviewed against your live Shopify cart.
Updating your cart…
Taxes and shipping calculated at checkout.
Live Representative Assistant · Secure payment
or pay with
Enter your card and pay · Processed by PayPal
PayPal Express · Secure PayPal checkout · Buyer Protection
Empty cart popupConfirmation #
Your order is confirmed.
Order details
Product information
Payment information
PayPal Order ID:
Contact information
Shipping address