Confirmation #
Thank you, !
Your order is confirmed.
XAG
Couldn't load pickup availability
The XAG P150 OEM Motor Gasket, XAG part number 02-002-13891, is a gasket for the propulsion motor of the XAG P150 (2024) agricultural drone. Small parts inside a motor are easy to lose, crush or leave out during a rebuild, and that is when a gasket matters most. A motor that ran quietly before it was opened and makes a new noise, runs rougher, or feels different afterwards should be opened again and checked for a gasket that is missing, out of place or damaged. Operators reach it through searches such as P150 motor gasket, XAG P150 motor washer, P150 motor rebuild parts, or XAG P150 motor noise after rebuild.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
The quantity per pack is not published for this part. Check the listing quantity, or ask us and we will confirm before dispatch.
Not included: the motor, the motor bearing (02-002-13256), the motor circlip (02-002-13892), the motor heat dissipation cover (02-001-09662), or tools.
A propulsion motor is built from a stack of precisely positioned parts. Gaskets in that stack can do more than one job. Depending on where they sit, they can seal a joint against moisture and dust, cushion one part against another, or take up a small, exact amount of space so that the parts around them sit at the right positions. The specific position and role of this gasket inside the P150 motor are not published for this part, so match it against the one you remove.
What matters for the operator is that the motor was designed with this gasket in place. Take it out, damage it, or fit it in the wrong place, and the motor is no longer assembled as designed. That can change how parts sit against each other, how the joint is sealed, or both.
Gaskets are most at risk during a motor rebuild. They are small, they can stick to one part and be lost when the motor is separated, they can be torn or crushed when parts are pressed together, and they can be left out entirely when a motor is reassembled in a hurry. Once the motor is closed, none of this is visible.
That gives a clear diagnostic pattern. If a motor was quiet and smooth before it was opened, and is noisier, rougher, warmer or different afterwards, the rebuild itself is the first suspect. Reopening the motor and checking that every gasket is present, undamaged and in its correct place often finds the cause quickly.
Outside rebuilds, gaskets age. Heat cycles from hard-working motors, chemical exposure from spray residue, and the pressure of the parts around them can harden, flatten or crack gasket material over a long service life, so that it no longer seals or spaces as it did when new.
Because they are small, low-cost and easily damaged, motor gaskets are best treated as part of every rebuild kit. Whenever a motor is opened, fitting new gaskets alongside a new circlip and, where needed, a new bearing gives the motor a complete, as-designed rebuild.
Working in a clean area and laying parts out in order as they come out of the motor makes it much harder to lose or misplace a gasket during the job.
The size, material and exact form of this gasket are not published for this part. Confirm the XAG part number on the packaging and match the new gasket against the old one before fitting.
Where it sits. Inside the propulsion motor; specific position not published for this part.
What it connects to. The motor parts on either side of it.
What wears it out. Rebuild handling. Crushing. Heat cycles. Chemical exposure. Loss during service.
What this part is not. It is not the bearing, the circlip or the heat dissipation cover.
The motor gasket keeps the motor assembled as designed at the joint where it sits.
A sound motor gasket provides:
Its value is in making a rebuilt motor run like a new one.
A motor that changed after it was opened points at the rebuild. Reopen it and check every small part, starting with the gaskets.
If the gasket is missing, damaged, hardened or out of place, this gasket is the part. Inspect the bearing and circlip while the motor is open.
Gasket replacement is the likely answer when an operator or technician observes:
These come from rebuild handling, crushing, heat, chemicals and loss.
These are not gasket symptoms, and this part will not fix them. A rough bearing needs the bearing. End play from a failed retaining ring needs the circlip. A cracked cover needs the heat dissipation cover. A damaged rotor or windings need the motor. A new gasket restores the joint; it does not repair other motor parts.
Product name: XAG P150 OEM Motor Gasket
XAG part number: 02-002-13891
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Propulsion, motor
Component type: Gasket
Installed position: Inside the motor; not published for this part
Function: Keeps its motor joint assembled as designed
Size, material and form: Not published for this part
Quantity per pack: Not published for this part
Related parts: Motor bearing 02-002-13256, motor circlip 02-002-13892 (sold separately)
Installation method: Fitted during motor assembly
Classification: Genuine XAG OEM gasket
Condition: Brand new
Before installation
During installation
After installation
The motor gasket is a rebuild part for every propulsion motor.
Service centres keep gaskets with bearings and circlips as a complete rebuild set, so that no motor is closed up with a damaged or missing gasket.
This is not the part you need if the gasket is present, undamaged and in place, and the fault lies in the bearing, circlip or motor itself. Reopen the motor and check every part first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your gasket; this one is identified for the P150.
A motor rebuild should leave the motor as good as new. A missing or damaged gasket is one of the easiest ways for it not to, and once the motor is closed, the mistake is invisible.
The pattern is the clue. A motor that changed right after it was opened has a rebuild fault until proven otherwise. Reopening it and checking every gasket is quick and usually decisive.
Fitting new gaskets at every rebuild removes doubt about old ones that may have hardened, flattened or torn during dismantling.
Careful work prevents most gasket faults: a clean area, parts laid out in order, and photographs taken before dismantling.
Gaskets are small and low-cost, but the motor around them is neither. Getting them right protects the motor and the work that went into rebuilding it.
For crews rebuilding motors in-house, keeping gaskets, circlips and bearings together as a matched set makes every rebuild complete.
A sound motor gasket restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM Motor Gasket
XAG part number: 02-002-13891
Brand: XAG
Component: Motor gasket
Category: Motor components
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Installed position: Inside the propulsion motor
Primary function: Keeping its motor joint assembled as designed
Characteristic failure modes: Missing after rebuild, torn, crushed, hardened, out of place
Distinguishing diagnostic rule: A new noise or feel right after a rebuild points at a missing or damaged gasket
Common causes: Rebuild handling, crushing, heat, chemicals, loss
Wear driver: Number of rebuilds and heat cycles
Related parts: Motor bearing 02-002-13256, motor circlip 02-002-13892, motor heat dissipation cover 02-001-09662
Quantity per pack: Not published for this part
Not included: Motor, bearing, circlip, heat dissipation cover, tools
Fitment method: XAG part number 02-002-13891 plus size and form against the removed gasket
Verification after fitting: Motor feels like the others by hand; no end play; normal sound in hover
Service habit: Fit new gaskets at every motor rebuild
Condition: Brand new
Part classification: Genuine XAG OEM gasket
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 motor gasket
XAG 02-002-13891
02-002-13891 motor gasket
XAG P150 OEM motor gasket
P150 motor gasket replacement
XAG P150 motor washer
XAG P150 motor rebuild parts
XAG P150 motor noise after rebuild
P150 motor rebuild kit
XAG P150 motor seal
XAG P150 motor parts
XAG P150 propulsion parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 motor gasket Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 motor gasket? It is a gasket, XAG part number 02-002-13891, fitted inside the XAG P150 propulsion motor.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
My motor is noisier since I rebuilt it. Could it be the gasket? Yes. A missing, damaged or misplaced gasket is a common rebuild fault. Reopen the motor and check.
Where in the motor does it go? The specific position is not published for this part. Match it against the gasket you removed and your photographs.
Can I reuse the old gasket? Not recommended. Gaskets can harden, flatten or tear. Fit a new one at every rebuild.
How many come in a pack? The quantity is not published for this part. Check the listing quantity or ask us to confirm.
Does it include the bearing or circlip? No. The bearing is 02-002-13256 and the circlip is 02-002-13892, sold separately.
What size is it? The size, material and form are not published for this part. Match against the gasket you removed.
Can I fit it myself? Yes, with care during a motor rebuild. If unsure, use a service centre.
How do I check the repair? The motor feels like the others by hand, has no end play and sounds normal in a hover test.
How do gaskets get lost? They stick to one part and fall away when the motor is separated, or are left out during reassembly.
Can I make a gasket from sheet material? Not recommended. The wrong material or thickness changes how the motor is assembled.
What ages gaskets? Heat cycles, chemical exposure and pressure from surrounding parts.
Will a P150 Max gasket fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
How can I avoid losing it? Work in a clean area, lay parts out in order and photograph before dismantling.
Should I keep spares? Yes, with circlips and bearings as a rebuild set.
Is it the same as the heat dissipation cover? No. The heat dissipation cover is 02-001-09662, a separate part.
How do I confirm the part number? Look for XAG part number 02-002-13891 on the packaging, or send us what you found and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Reviewed against your live Shopify cart.
Updating your cart…
Taxes and shipping calculated at checkout.
Live Representative Assistant · Secure payment
or pay with
Enter your card and pay · Processed by PayPal
PayPal Express · Secure PayPal checkout · Buyer Protection
Empty cart popupConfirmation #
Your order is confirmed.
Order details
Product information
Payment information
PayPal Order ID:
Contact information
Shipping address