Confirmation #
Thank you, !
Your order is confirmed.
XAG
Couldn't load pickup availability
The XAG P150 OEM Tripod Crossbar, XAG part number 02-002-13935, is the crossbar of the tripod landing gear on the XAG P150 (2024) agricultural drone. Landing gear legs carry weight downwards, but under load they also want to spread apart, and the crossbar is what ties them together and stops that. A crossbar that is cracked, bent or loose at its joints may look fine with an empty aircraft, then let the legs splay when the tank is full or on a hard landing. If the landing gear sits wider or lower when loaded than when empty, the crossbar and its joints are the place to look. Operators reach it through searches such as P150 tripod crossbar, XAG P150 landing gear crossbar, P150 landing gear brace, or XAG P150 legs splaying.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the spray tripod pipes (02-002-13943), the tripod ground contact components (including No. 2, 14-007-00046), fasteners, or tools.
A landing gear leg does two jobs at once. It carries the aircraft's weight down to the ground, and it resists the sideways forces that try to push the legs apart. Those sideways forces are small with an empty aircraft standing still, but they grow quickly with a full tank and become very large on a hard landing, when the aircraft's weight and momentum drive the legs outward.
The tripod crossbar ties the legs together against that spreading force. It forms a brace between them, so that the landing gear acts as one rigid frame rather than separate legs. The exact position of the crossbar within the P150's landing gear is not published for this part; match it by XAG part number and against the crossbar you remove.
When the crossbar and its joints are sound, the landing gear keeps its shape under every load. When the crossbar is cracked, bent or loose where it joins the legs, the frame loses that rigidity. The legs can splay outward under load, then spring back when the load is removed.
That spring-back is what makes crossbar damage easy to miss. Inspected with an empty aircraft on the bench, the landing gear may look perfectly normal. Loaded with a full tank, or thrown outward by a hard landing, the legs spread, the aircraft sits lower and wider, and the extra movement fatigues every joint in the gear.
The test is to compare the landing gear empty and loaded. With the battery removed, look at the gear with the tank empty, then load the tank with water on the ground and look again. Legs that visibly spread, or a stance that becomes noticeably wider and lower, point at the crossbar or its joints.
Crossbars are damaged by hard and sideways landings, by landing on uneven ground that loads one side, by impacts during handling, and by corrosion at the joints from spray residue and wash water.
A loose joint is sometimes just a loose fastener, which can be tightened. But a crossbar that is cracked, bent or worn at its ends needs replacing, because it can no longer brace the legs properly.
When replacing the crossbar, inspect the tripod pipes and the ground contact components too. Landing gear that has been splaying will have put extra stress on all of them.
Where it sits. In the tripod landing gear, bracing the legs; exact position not published for this part.
What it connects to. The tripod pipes it braces, through its end joints.
What wears it out. Hard and sideways landings. Uneven ground. Handling impacts. Corrosion at joints.
What this part is not. It is not a tripod pipe or a ground contact component.
The tripod crossbar braces the landing gear legs against spreading.
A sound tripod crossbar provides:
Its value is in keeping the legs together when the load tries to push them apart.
Crossbar damage often hides when the aircraft is empty. Compare the landing gear empty and loaded.
If the crossbar is cracked, bent or worn at its ends, this crossbar is the part. Tighten or repair loose joints at the same time.
Tripod crossbar replacement is the likely answer when an operator or technician observes:
These come from hard landings, uneven ground, impacts and corrosion.
These are not tripod crossbar symptoms, and this part will not fix them. A bent tripod pipe needs the pipe. A worn foot needs the ground contact component. A simply loose fastener needs tightening. Damaged airframe mounts need their own repair. A new crossbar restores bracing; it does not straighten bent legs.
Product name: XAG P150 OEM Tripod Crossbar
XAG part number: 02-002-13935
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Landing gear
Component type: Tripod crossbar
Installed position: In the tripod landing gear; exact position not published for this part
Function: Braces the landing gear legs against spreading
Works with: Spray tripod pipe 02-002-13943 (sold separately)
Quantity: 1 × crossbar
Length, diameter and material: Not published for this part
Installation method: Direct replacement in the landing gear
Classification: Genuine XAG OEM landing gear part
Condition: Brand new
Before installation
During installation
After installation
The tripod crossbar keeps the landing gear rigid.
Service centres check landing gear loaded as well as empty, because crossbar damage that springs back when unloaded is one of the most commonly missed faults.
This is not the part you need if the crossbar is sound and the problem is a bent pipe, a worn foot or a loose fastener. Compare the gear empty and loaded first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your crossbar; this one is identified for the P150.
The heavier the aircraft, the harder the landing gear legs try to spread. The crossbar is what holds them together, especially with a full tank and on hard landings.
A damaged crossbar can hide when the aircraft is empty, because the legs spring back. Checking the gear loaded reveals it.
Gear that splays under load fatigues every joint and puts extra stress on the pipes and feet. Replacing the crossbar early protects the whole frame.
Tightening a loose joint may be enough; replacing a cracked or bent crossbar is the cure when it is not.
Gentle landings, level landing areas and checking the gear after any hard landing prevent most crossbar damage.
For crews flying full tanks from rough ground, a loaded stance check at each service is a simple, valuable habit.
Recording hard landings by aircraft makes it easier to decide when a crossbar deserves a closer look.
A sound tripod crossbar restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM Tripod Crossbar
XAG part number: 02-002-13935
Brand: XAG
Component: Tripod crossbar
Category: Landing gear
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Installed position: In the tripod landing gear
Primary function: Bracing the landing gear legs against spreading
Characteristic failure modes: Cracks, bending, worn ends, loose or corroded joints
Distinguishing diagnostic rule: Landing gear that spreads when loaded but looks normal empty points at the crossbar
Common causes: Hard and sideways landings, uneven ground, impacts, corrosion
Wear driver: Loaded landings
Related parts: Spray tripod pipe 02-002-13943, tripod ground contact component No. 2 14-007-00046
Not included: Tripod pipes, ground contact components, fasteners, tools
Fitment method: XAG part number 02-002-13935 plus length, shape and ends against the removed crossbar
Verification after fitting: Stance unchanged when loaded; no play at joints
Inspection habit: Compare the landing gear empty and loaded at each service
Condition: Brand new
Part classification: Genuine XAG OEM landing gear part
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 tripod crossbar
XAG 02-002-13935
02-002-13935 tripod crossbar
XAG P150 OEM tripod crossbar
P150 crossbar replacement
XAG P150 landing gear crossbar
XAG P150 landing gear brace
XAG P150 legs splaying
P150 landing gear spreading
XAG P150 landing gear parts
XAG P150 tripod parts
XAG P150 airframe parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 tripod crossbar Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 tripod crossbar? It is the crossbar, XAG part number 02-002-13935, that braces the legs of the XAG P150 tripod landing gear.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
What does it do? It ties the landing gear legs together so they do not spread under load.
My landing gear looks fine empty but spreads with a full tank. Why? The crossbar or its joints may be damaged. The legs spring back when unloaded.
How do I check it? Compare the gear empty and with the tank loaded with water. Spreading or a lower, wider stance points at the crossbar.
Does it include the pipes? No. The spray tripod pipe is 02-002-13943, sold separately.
Where exactly is it fitted? The exact position is not published for this part. Match it against the crossbar you removed.
Can I just tighten a loose joint? If the crossbar itself is sound, yes. A cracked, bent or worn crossbar needs replacing.
Can I fit it myself? Yes. Empty the tank, support the aircraft, swap the crossbar and tighten evenly.
How do I check the repair? The stance does not change when loaded and there is no play at the joints.
Does it come with fasteners? No. Reuse sound original fasteners.
What damages crossbars? Hard and sideways landings, uneven ground, impacts and corrosion at joints.
Will a P150 Max crossbar fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
Can I straighten a bent crossbar? Not recommended. It will have lost strength. Replace it.
Should I check the pipes and feet? Yes. Splaying gear stresses the whole frame.
How can I protect it? Land gently on level ground and check the gear after any hard landing.
Why does a full tank matter? The heavier the aircraft, the harder the legs try to spread.
How do I confirm the part number? Look for XAG part number 02-002-13935, or send us a photograph of the landing gear and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Reviewed against your live Shopify cart.
Updating your cart…
Taxes and shipping calculated at checkout.
Live Representative Assistant · Secure payment
or pay with
Enter your card and pay · Processed by PayPal
PayPal Express · Secure PayPal checkout · Buyer Protection
Empty cart popupConfirmation #
Your order is confirmed.
Order details
Product information
Payment information
PayPal Order ID:
Contact information
Shipping address