Segurança baterias DJI Agras T100 T70 T25P

DJI Agras T100/T70 Series/T25P: Segurança de Baterias — Água, Temperatura, Danos e Armazenamento

DJI Agras T100/T70 Series/T25P: Segurança de Baterias — Água, Temperatura, Danos e Armazenamento

O Battery Safety Notice do DJI AGRAS T100/T70 Series/T25P Safety Guidelines separa battery errors normais de safety events. Liquid exposure, swelling, leakage, impact damage, heat e over-discharge mudam o workflow imediatamente.

Resumo: mantenha a battery longe de liquid/rain. Se molhar, remova, coloque em área seca/aberta longe de flammable material e contate official support/dealer. Use official batteries e recommended chargers. Use range: -5°C a 45°C. Não use battery swollen, leaking, damaged, crashed ou heavily impacted. Não disassemble/pierce e não armazene por longo tempo fully discharged.

Segurança de bateria DJI Agras T100 T70 T25P

1. Liquid exposure = isolation event

Não trate como normal charging error.

2. Fire/explosion risk

A source relaciona liquid exposure a risco grave.

3. Wet battery workflow

  1. remove from service;
  2. dry/open area;
  3. away from flammables;
  4. no normal charge test;
  5. contact support/dealer.

4. No test charging after water

A source não suporta isso.

5. Official batteries

Não use non-official batteries.

6. Recommended official chargers

Parte da safety rule.

7. Use temperature

-5°C a 45°C.

8. High temperature

Fire/explosion risk aumenta.

9. Low temperature

Performance reduz.

10. Swollen

Do not use.

11. Leaking

Do not use.

12. Visible damage

Do not use.

13. Crash/heavy impact

Do not use.

14. Power-on does not prove safety

Impact history continua relevante.

Fonte Battery Safety DJI Agras

15. Electrolyte

Highly corrosive; wash skin/eyes with water and seek medical support.

16. No disassembly

Não abrir pack.

17. No puncture

Risco grave.

18. Keep away from children

Explicit source rule.

19. Heat sources

Keep away.

20. Hot vehicle

Não deixar dentro.

21. Full-discharge storage

Não por extended period.

22. Over-discharge

Pode causar irreparable damage.

23. Physical safety outranks firmware diagnosis

Wet/swollen/leaking/impact first.

24. Normal errors are another branch

Firmware/connectors only after safety exclusions.

25. Battery intake checklist

  • model;
  • liquid exposure;
  • impact;
  • swelling;
  • leakage;
  • shell damage;
  • heat exposure;
  • storage state;
  • charger;
  • warning.

26. Quarantine criteria

Wet, leaking, swollen, damaged ou impact batteries não voltam à normal rotation.

27. Fleet battery ID

Track each pack separately.

28. Storage log

Record long storage.

29. Heat-event log

Record unusual heat exposure.

30. T100 battery path

DB2160 + C12000 verified current store paths.

31. No automatic cross-model mapping

Source não fornece shared material number.

32. Charger compatibility

Verify per model/battery family.

33. Erro: charge after rain

Isolate first.

34. Erro: swollen but voltage normal

Still no-use.

35. Erro: reuse after crash

Not supported.

36. Erro: fully discharged storage

Avoid extended period.

37. Erro: all errors = firmware

Physical safety branch comes first.

38. Perguntas frequentes

Temperature?

-5°C a 45°C.

Wet battery?

Isolate and contact support/dealer.

Swollen?

Do not use.

Heavy impact?

Do not use.

Fully discharged storage?

Not extended.

Third-party battery?

Source says no.

Fonte e revisão

Fonte: DJI AGRAS T100/T70 Series/T25P Disclaimer and Safety Guidelines v1.0, Battery Safety Notice.

39. Battery safety triage deve acontecer antes de qualquer service bench work

Antes de conectar charger, abrir software ou limpar connectors, classifique o pack: normal service candidate ou safety isolation. Liquid exposure, swelling, leakage, crash/heavy impact e visible damage mudam a decisão imediatamente.

40. Fleet teams devem registrar incident history por pack

Duas batteries com aparência semelhante podem ter histories muito diferentes. Use battery ID para registrar exposure to rain, impact, unusual heat, warnings e long-storage state.

41. Temperature range não significa que performance seja igual em toda a faixa

A source fornece -5°C a 45°C como use range, mas também diz que low temperature reduz performance e high temperature aumenta safety risk. Planeje margin adicional em extremos.

42. Storage check antes de recolocar em serviço

Depois de storage, confirme que o pack não ficou fully discharged por período prolongado, não mostra swelling/leakage e não teve heat exposure conhecida.

43. Charger choice deve ser registrado

Se houver repeated charging issue, saber qual charger foi usado ajuda a separar battery fault de charging-path problem. A source recomenda official chargers.

44. Safety-release checklist

  • no liquid exposure;
  • no swelling/leakage;
  • no crash/heavy impact;
  • no visible damage;
  • temperature history acceptable;
  • storage state acceptable;
  • official/recommended charging path confirmed.

45. Wet battery deve sair do normal charging workflow

Se houve contato com liquid, chuva ou water immersion, a source não trata o pack como um erro comum de charging. Remova o battery, coloque em local seco e aberto longe de material inflamável e siga official support/authorized dealer guidance.

46. Crash history muda a decisão de safety

Uma battery que sofreu crash ou heavy impact não deve voltar ao serviço apenas porque ainda powers on ou mostra voltage normal. O histórico físico passa a ser parte do go/no-go.

47. Use temperature não é storage specification

O range de -5°C a 45°C publicado nesta source descreve uso. Não o transforme automaticamente em regra completa de long-term storage; esta mesma notice apenas enfatiza evitar heat exposure e extended fully discharged storage.

48. Hot vehicle é um exposure event

A DJI cita explicitamente veículos quentes como exemplo de heat source perigosa. Em fleet operations, registre se um pack ficou em veículo fechado ou outra situação de high heat antes de liberar novamente.

49. Electrolyte exposure exige resposta imediata

Se electrolyte tocar pele ou olhos, lave imediatamente com água e procure medical support. Esse branch é de exposure response, não battery troubleshooting.

50. Battery intake workflow

  1. confirmar battery model/ID;
  2. perguntar sobre water exposure;
  3. perguntar sobre crash/heavy impact;
  4. inspecionar swelling/leakage/visible damage;
  5. revisar heat exposure;
  6. revisar long fully discharged storage;
  7. somente então seguir para charging/firmware diagnostics se o pack permanecer elegível.

51. Official charger é parte do safety chain

Quando um charging issue aparece, registre qual charger foi utilizado. A source recomenda official chargers e proíbe non-official batteries.


Para T100, use o battery/power path verificado

Solicitar suporte

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.

DJI AGRAS SOLUTIONS

Equipment for This Application

The DJI Agras equipment Ares Acres stocks for the work described above.