DJI Agras T100 end of day spray cleaning checklist

DJI Agras T100 End-of-Day Spray Cleaning Guide: Tank, Strainer, Motors & Controller

September 17, 2026

The T100 Quick Start Guide ends its English operating section with a six-step daily maintenance routine for spraying operations. This is a different job from a long-term maintenance schedule: it is the shutdown-and-cleaning sequence an operator should perform after a day of spraying once the aircraft has cooled back to a normal temperature.

Quick Answer: Do not clean the T100 immediately after an operation. Wait until the aircraft returns to a normal temperature. Flush the spray tank with clean or soapy water or use Clean Hose, clean the spray-tank strainer, remove the flight battery before washing the aircraft body, wipe and dry motors and propellers, wipe the remote controller with a wrung-out wet cloth, and store the cleaned aircraft in a dry environment.

DJI Agras T100 seven step end of day spray cleaning checklist — Field checklist derived directly from the Quick Start Guide maintenance section.

First rule: let the aircraft cool before cleaning

DJI says to clean the aircraft and remote controller at the end of each day of spraying after the aircraft returns to a normal temperature. Do not begin washing immediately after operations are completed.

1. Flush the spray tank and hose path

DJI Agras T100 maintenance section with tank flushing strainer cleaning aircraft washing and storage — The complete English maintenance section appears directly above the Quick Start Guide specification table.

Fill the spray tank with clean or soapy water and spray the water through the sprinklers until the tank is empty. DJI also gives an app-based alternative: enable the Clean Hose function in Spray Setting. Repeat the cleaning step so the tank is completely cleaned.

The verified tank replacement path in the current catalog is the DJI Agras T100 OEM 75L Water Tank. This quick-start cleaning procedure applies to the installed spraying system; do not use a product-page link as a substitute for the manufacturer cleaning sequence.

2. Remove and clean the spray-tank strainer

Remove the spray-tank strainer, clean it and clear any blockage. The Quick Start Guide does not publish a part number for that strainer on this page, so this article does not claim that a different filter SKU is the exact part.

For broader filtration and spray-system service, use the DJI Agras T100 Spraying System Parts collection. The store also carries T100 100 Mesh Filters (5 Pcs), but the Quick Start Guide does not identify those as the exact removable tank strainer described in this maintenance step.

3. Remove the battery before washing the aircraft

DJI says to make sure the aircraft structure is completely connected and the battery is removed before direct washing with water. It recommends a spray washer filled with water for cleaning the aircraft body, followed by a soft brush or wet cloth, then a dry cloth to remove water residue.

The active flight-battery path is the DB2160 Intelligent Flight Battery. Battery removal here is a cleaning-safety boundary, not an instruction to open or service the battery.

4. Clean motors and propellers carefully

If there is dust or pesticide liquid on the motors or propellers, wipe the affected surfaces with a wet cloth and then remove remaining water residue with a dry cloth.

For deeper propulsion inspection intervals and replacement logic, use the existing T100 motor/propeller/ESC maintenance article rather than treating daily cleaning as a propulsion overhaul.

5. Wipe the remote controller

Use a clean wet cloth that has been wrung out with water to wipe the controller surface and screen. The controller product path is the DJI Agras T100 OEM Remote Controller.

6. Store the cleaned aircraft dry

After cleaning and drying, store the aircraft in a dry environment. This is the final step in the Quick Start Guide's daily maintenance routine.

Daily cleaning vs deeper maintenance

This article owns the end-of-day spray-cleaning intent. For pump, hose, sprinkler and strainer diagnostics, use DJI Agras T100 Spraying System Maintenance. For time-based inspections and replacement cycles, use the T100 Maintenance Schedule.

Useful spraying-system service paths

For field spares after cleaning or inspection reveals wear, one verified current kit is the T100 Spray System Critical Spares Pack. Use exact component diagnosis before replacing parts; cleaning residue alone does not prove a component has failed.